Experiment investigation on effects of elastic modulus on cavitation erosion of silicone rubber

Research into cavitation phenomena in various fields shows that the elastic modulus of a boundary has a potential impact on cavitation erosion. To obtain the direct relationship between the elastic modulus of the boundary and cavitiation erosion, single-layer samples with different chemical composition and moduli, and double-layer samples with different elastic moduli and the same surface layer material, were prepared with silicone rubber. The results of cavitation experiments on single-layer samples, show that the coating chemical composition and mechanical properties together affect the cavitation morphology of the coating, and dominant factors vary with erosion stage. Through the cavitation test of double-layer samples, it was found that there is a positive correlation between the elastic modulus of the coating and the degree of cavitation. This study helps us to understand the relationship between coating elastic modulus and cavitation more directly, and provides theoretical and technical guidance for the application of anti-cavitation for elastic coating in engineering.     

Material functions generated by the complex viscosity

Based on the complex viscosity model various steady-state and transient material functions have been completed. The model is investigated in terms of a corotational frame reference. Also, BKZ-type integral constitutive equations have been studied. Some relations between material functions have been derived. C ^–1 Finger tensor - F[], (F ^–1[]) Fourier (inverse) transform - rate of deformation tensor in corotating frame - h(I, II) Wagner's damping function - J (x) Bessel function - m parameter inh (I, II) - m(s) memory function - m _k, n_k integers (powers in complex viscosity model) - P principal value of the integral - parameter in the complex viscosity model - rate of deformation tensor - shear rates - [], [] incomplete gamma function - (a) gamma function - steady-shear viscosity - ^* complex viscosity - , real and imaginary parts of ^* - ₀ zero shear viscosity - ⁺, ₁ ⁺ stress growth functions - ^–, ₁ ^- stress relaxation functions - (s) relaxation modulus - ₁(s) primary normal-stress coefficient - ø(a, b; z) degenerate hypergeometric function - ₁, ₂ time constants (parameters of ^*) - frequency - extra stress tensor     

On the damping function of shear relaxation modulus for entangled polymers

Published data of the damping function of the shear relaxation modulus, h(), are reviewed. This is the ratio of the relaxation modulus measured at a finite magnitude of shear, , to that at the limit of = 0. Majority of the data are in accord with the universal function of the Doi-Edwards tube model theory, in which the damping or the decrease of h() is attributed to the contraction along the tube of extended polymer chains. The weaker damping seems to be attributed to 1) comb-branching such as in LDPE; 2) lack of entanglement in too short chains; 3) bimodal molecular weight distribution. However, a star-branching does not cause a deviation from the tube model theory and a broadness of molecular weight distribution is not a major origin of a weaker damping. A star-branched polystyrene with 15 arms exhibits no strain dependence: h() = 1. For highly entangled systems with more than 50 entanglement points per molecule, the strain dependence is stronger than that of the Doi-Edwards theory. This could be due to a slip or an instability of deformation in the material.     

松质骨弹性模量计算的均匀化方法

对松质骨建立了六种单胞微观结构模型，采用均匀化方法和有限元方法计算松质骨的宏观等效弹性模量。给出了六种单胞模型的松质骨弹性模量与材料密度(体分比）的关系，与实验数据进行了对比，分析了不同微观结构模型在不同骨骼中的应用。结果表明，本文方法及六种单胞模型可以对松质骨微观结构和材料性能进行有效的模拟计算。同时本文又着重对松质骨的宏观等效弹性模量与体分比的指数关系进行了探讨。     

Microstructures réalisant toute compressibilité ou conductivité encadrée par les bornes de Hashin et Shtrikman

The conductivity or bulk modulus of an isotropic composite consisting of two well-ordered isotropic phases is situated between the lower and upper bounds of Hashin and Shtrikman. This work is concerned with the construction of two new microstructures capable of realizing every conductivity or bulk modulus comprised between these bounds. The two microstructures obtained, appearing to be simpler than those presented in the literature to achieve the same purpose, have the property that the variation of the corresponding conductivity or bulk modulus is strictly monotone with respect to the geometric parameter characterizing them. To cite this article: Q.-C. He, H.L. Quang, C. R. Mecanique 333 (2005).     

孪晶对多晶纯钛塑性变形影响的实验研究

本文介绍了不同温度下多晶纯钛试件的单调拉伸、压缩试验和不同应变的压缩加卸载试验及其结果,同时介绍了拉断试样以及不同压缩应变下卸载试样的金相观察结果。通过直接比较不同温度下多晶纯钛的单调拉伸、压缩试验结果以及相应的金相分析,得到了由孪晶单独引起的流动应力的增加与应变之间的定量关系。本文还根据Hall-Petch关系和孪晶体积分数的演化方程,建立了孪晶引起的流动应力的增加与应变之间的唯象解析关系。试验结果表明此唯象关系较好地描述了孪晶对多晶纯钛塑性变形的影响。     

聚氨酯泡沫塑料压缩杨氏模量的理论预测

通过微分法导出了泡沫塑料剪切模量和体积模量所满足的微分方程组，再利用联系泡沫塑料泊松比和孔隙比的Ｋｅｒｎｅｒ－Ｒｕｓｃｈ经验关系及泡沫塑料弹性常数间满足足的关系，在基体材料不可压缩的假设下，确定了泡沫塑料的杨氏模量。本文针对几种密度的泡沫塑料，分别对它们的杨氏模量进行了理论预测和实验测定，结果表明：理论预测的模量在较高密度下与实验符合的很好，在低密度下也给出相当好的近似值。此外，本文的结果同其他理     

Synthesis and performances for treating oily wastewater produced from polymer flooding of new demulsifiers based on polyoxyalkylated N,N‐dimethylethanolamine

Usually, oily wastewater produced from polymer flooding (OWPF) was treated by cationic polymer in oilfield. In this paper, six block copolymers of ethylene oxide and propylene oxide were prepared by using N,N‐dimethylethanolamine (DMEA) as the acceptor (DMEA‐mnp and DMEA‐mnpq, n:m:p:q represented the weight ratio of different blocks). Most of DMEA products could perform well for treating OWPF, especially DMEA1231. Their performances were mainly affected by temperature. The reason of increasing oil removal performance of DMEA1231 with temperature was the decrease of interfacial dilational modulus (ε) with increasing temperature. When temperature raised up to 55°C, the ε of DMEA1231 had the minimum (1.5 l mN/m). Therefore, the OiW had the minimum (90 mg/l). Because DMEA1231 had the best performance, its flocculation kinetics was studied systemically. The results showed that the optimum condition for DMEA1231 was as follows: dosage was 300 mg/l, temperature was 55°C, stirring speed was 200 rpm and stirring time was 5 min. At last, the offshore oil field test was carried out to check the DMEA1231 performance. The result showed that at the optimum condition, DMEA1231 could perform as well as the cationic polymer. The most important thing was that flocs of DMEA1231 were not viscous and floated on the surface of the water. The results obtained by this paper provide a good choice for the treatment of OWPF in offshore oilfield to avoid the formation of viscous flocs. Copyright © 2014 John Wiley & Sons, Ltd.     

环烷酸对油水界面膜流变性质的影响研究

研究了环烷酸对油水界面膜界面张力、弹性模量、损耗模量以及界面膜破裂速率常数的影响,同时对环烷酸与沥青质之间的相互作用进行了测定。结果表明,环烷酸使得原油油水界面张力下降;弹性模量随着环烷酸加量以及振荡频率的增加都分别逐渐增大,并且最终都趋于平衡;在任何振荡频率值时,损耗模量都随着环烷酸加量先增大后减小;当环烷酸加量增加时,界面膜破裂速率常数降低。环烷酸与沥青质之间存在相互作用,随着环烷酸加量的增加,其对沥青质界面膜弹性模量的影响与对原油界面膜弹性模量的影响相似,表明环烷酸主要是通过与沥青质相互作用而促进乳状液稳定性的。     

橡胶在动态载荷下的能量损耗分析

以交联密度不同的同类轮胎胎面胶A1和A2为研究对象,通过动态拉伸实验得到储能模量及损耗模量随频率变化的曲线.建立了黏弹性广义Maxwell模型来定量分析不同温度的橡胶在不同频率的动态载荷下的能量损耗.采用非线性规划的方法分别在低频(10~25 Hz)及高频(25~60 Hz)下拟合模量-频率曲线,得到黏弹性广义Maxwell模型的参数值.采用有限元软件Abaqus模拟胎面胶动态拉伸过程并计算胎面胶的损耗角正切,得到不同温度下胎面胶的损耗角正切随激振频率的变化规律,通过和实验结果的比较证明文中所述黏弹性广义Maxwell模型及其参数获取方法可准确应用于胎面胶的动态拉伸性能分析.预测了在不同温度及频率下每一循环载荷周期中胎面胶的应力-应变迟滞回线以及单位体积胶料的能量损耗,阐释了不同温度下的胎面胶的能量损耗随频率的变化规律,同时结合2种胎面胶的交联密度测试数据分析了胶料的构效关系.